Loading... Please wait...

Panel Antenna for Inside Window Mounting, 75ohm - 304472

Product subtitle:
Inside-window mounted, tower-facing panel antenna for building installations with no roof access, 75 ohm
  • Wilson 304472 Suction-Cut Outside-facing Window Mount Panel Antenna 75 ohms Multi Band, main image
  • Wilson 304472 Suction-Cut Outside-facing Window Mount Panel Antenna 75 ohms Multi Band, alternative side view
  • Wilson 304472 Suction-Cut Outside-facing Window Mount Panel Antenna 75 ohms Multi Band, magnified view
  • Wilson 304472 Suction-Cut Outside-facing Window Mount Panel Antenna 75 ohms Multi Band, angled side view
  • Wilson 304472 Suction-Cut Outside-facing Window Mount Panel Antenna 75 ohms Multi Band, with label
SKU:
WA304472
Rating:
Availability:
In Stock. Ships in 1-2 business days. Expedited shipping available.
Retail Price:
$99.95
Your Price:
$79.99 (You save $19.96)
Quantity:

Wilson 304472 Window Mount Panel Antenna is a 75 ohms wide-band antenna designed to be used with one of our amplifiers and features up to 10.6 dB of gain.  The Wilson 304472 improves signal transmission between your Wilson amplifier and your nearest cellular signal tower. It is built for fixed installations and should face the nearest cellular signal tower.  This panel antenna is utilized differently that the other indoor phone-facing panel antennas as it is intended to replace an outdoor Omni or Yagi antenna.  This antenna is designed to be mounted on the inside glass-surface of your window facing the outside of the building towards your nearby cellular tower.  It is a viable choice when a typical outdoor antenna (Omni or Yagi) cannot be easily mounted on the roof or high exterior wall.  It is suitable for apartments and condominiums with limited exterior property modification access.  So it is possible that your 75 ohm amplifier system will utilize this panel antenna to face the tower and another panel antenna (with wall, ceiling, or pole mount) to face your cellular devices. This is completely fine as long as adequate separation between the two panel antennas exists.  

Application/Usage:

  • Designed to be used as an indoor-mounted but outdoor antenna and to be installed on a window, facing the nearest tower

Compatibility:

  • Works with 75 Ohm amplifiers and accessories
  • Supports all carriers  transmitting at the following frequency bands:
    • 700-800 MHz, 5.2 dBi Gain
    • 824-894 MHz, 4.4 dBi Gain
    • 880-960 MHz, 4.2 dBi Gain
    • 1710-1880 MHz, 10.1 dBi Gain
    • 1850-1990 MHz, 10.6 dBi Gain
    • 2110-2170 MHz, 8.2 dBi Gain

Package Includes:

  • Wilson 304472 Inside Window Mount Panel Antenna
  • Suction Cup Inside Window Mounts
  • Secure two-way tape

Product Features:

  • Multi Band versatility
  • Fixed installations
  • Directional antenna
  • Built-in ground plane
  • Mounting hardware included

 

Technical Specifications

Frequency  700/850/900/1700/1900/2100 MHz
700-800 MHz Gain  5.2 dBi 
824-894 MHz Gain  4.4 dBi
880-960 MHz Gain  4.2 dBi
1710-1880 MHz Gain        10.1 dBi
1850-1990 MHz Gain  10.6 dBi
2110-2170 MHz Gain  8.2 dBi
Impedance  75 Ohms
Radiation  Directional
Polarization  Vertical
Max Power  50 watts
Beamwidth Horizontal Plane     70° / 60° 
Beamwidth Vertical Plane  50° / 45° 
Connector  F-Female
Dimensions  8.27 x 7.09 x 1.73 inches / 21 x 18 x 4.39 cm      
Ground Plane  Built-in
Documentation  Installation Guide

 



 

 


 


 

 

 




 
 
 
This panel antenna is not a typical indoor panel antenna. It is intended to replace an outdoor Yagi or Omni antenna as the tower-facing antenna, when roof access is restricted. This antenna cannot be used as an indoor panel antenna because the window mount forces the antenna to mount on inside facing outwards. This is not a weather-resistant antenna so do not attempt to attach to outside window to face inwards).

Ensure that you purchase the correct impedance antenna for your amplifier system. 50 ohm antennas (with N connectors) go with 50 ohm systems and 75 ohm antennas (with F connectors) go with 75 ohm systems. Panel antenna installation is easy. Just choose your preferred mounting style. Attach the mount in the optimal place on wall, ceiling, or pole. Attach the antenna to the fixed mount. And connect the installed antenna to the amplifier using a separate N-Male (50 ohm) or F-Male (75 ohm) cable. Panel Antennas are directional antennas which will transmit and receive signal mostly from the front. It must be installed vertically on inside-surface of a window and should point towards your nearest cellular tower. This is a building antenna so large vehicle installations will require secure installation using appropriate mounts to prevent antenna vibration and shifting inside the mount.

This product hasn't received any reviews yet. Be the first to review this product!



© 2013 WilsonAmplifiers.com | Sitemap | Old Pages

Seal BBB Authorize.Net system installer retailer installer Paypal BBB