Loading... Please wait...
30 Day Money Back Guarantee – No Questions Asked!

PLUG-N-PLAY KITS

Sleek 4G Amplifier Only, +26dB all 4G cradle - 813425

Product subtitle:

Quint-band cradle amplifier for all 4G/3G/Edge North American networks, single-user

  • Sleek 4G Amplifier only, Wilson 813425, quint-band cradle amplifier, main image
  • Sleek 4G Amplifier only, Wilson 813425, quint-band cradle amplifier, amplifier with phone image
  • Sleek 4G Amplifier only, Wilson 813425, quint-band cradle amplifier, amplifier cradle, side view
  • Sleek 4G Amplifier only, Wilson 813425, quint-band cradle amplifier, in-car use with hands-free
  • Sleek 4G Amplifier only, Wilson 813425, quint-band cradle amplifier, installation diagram for car
  • Sleek 4G Amplifier only, Wilson 813425, quint-band cradle amplifier, with label
SKU:
WA813425
Rating:
Availability:
Discontinued
Price:
$0.00

This item has been upgraded to the all new US version Wilson 460107 Sleek 4G.

 

Wilson 813425 Amplifier Only is designed for users who wish to pick their own Antennas and Mounts from our large selection.

The new quint-band cradle signal booster from Wilson is a vehicle solution that amplifies cellular signals in  the 700 MHz, 800 MHz, 1700MHz, 1900 MHz, and 2100MHz frequencies.  It works with AT&T's 4G LTE network, Verizon, T-Mobile, and Sprint's LTE network.  To maximize efficiency of 4G band use, this advanced Sleek has a manual switch that allows the user to select between 4G AT&T and 4G Verizon bands.  All other 4G, 3G, and 2G frequencies will work equally well on both band selections.  It also works with most 2G and 3G networks. It provides a gain of up to 29dB, delivers more than 20 times the power of a typical cell phone, and is designed to keep your cellular device connected even in weak signal areas, minimizing occurences of dropped calls and improving data transfer rates. 

The cradle is a signal amplifier which securely holds your phone, mounts on your vehicle's vents, and is physically connected to a 4-inch external antenna with a 10-foot coaxial cable.  The cradle antenna requires direct physical contact with the back of your cell phone.  Optional accessories are available to mount your Sleek on the dashboard or cup holder; there is even a kit that allows you to use your Sleek at home at the office.

Application/Usage:

  • Boosts 4G, 3G, and 2G signals on all major carrier networks in North America (iDEN & WiMax not supported)
  • Includes manual switch that selects between 4G Verizon & AT&T bands (all other 2G, 3G, and 4G networks operate on both settings)
  • Provides reliable voice and data streams in weak signal areas
  • Enhances your phone's power by over 20 times
  • Extends the battery life of your phone
  • Simple, fast installation
Package includes
  • USB car cigarette lighter power supply
  • Adhesive dashboard mount
  • Two sets of replacement cradle arms 
 
 

Technical Specifications

Frequency  698-746MHz / 746−787 MHz / 824-894 MHz / 1850-1995 MHz / 1710-2155 MHz    
Impedance  50Ω
Uplink   27.9 / 28 / 28.6 / 26.6 / 28.2
Downlink  3.1 / 3.6 / 2.4 / 9.2 / 9.4
Noise Figure  3.0 dB nominal
Power Requirements     5.5V DC, 2.5 A 
Connectors  SMA Female

 

 

 

 

 

 

 

Sleek installation is very user-friendly and shouldn’t take more than 30 minutes. Sleek amplifier systems have two separate components which need to be installed and connected: the amplifier cradle and the exterior antenna. The amplifier cradle includes both the amplifier and the interior “direct-connect” antenna in a convenient, phone-holding design.

First, install the adhesive mount in the desired vertical position of your dashboard (not on your air bag cover) and adjust the cradle arms to fit your phone. Allow 24 hours for the mount’s 3M adhesive to set before attaching the amplifier cradle to the mount. The included 5V car cigarette lighter power supply with a 3-foot USB/USB-mini cable will be used to power the amplifier. Additional 5V AC wall power supplies and 5V DC hardwire vehicle kits are available. Use the bottom mini-USB port on the cradle as the power port (so both power cable and antenna cable exit the cradle at the same angle from the bottom).

Second, install the magnet-mount exterior antenna (or optional trucker/marine antenna) in the desirable position in the center of your car roof or trunk (at least 12 inches away from other antennas and 6 inches away from windows or sunroof). The strong, rare-earth magnet will securely hold the antenna in place. The antenna cable is thin enough to feed under the door rubber seal and through the door frame.

Finally, connect the exterior antenna to the amplifier and power on the amplifier cradle. Once connected and powered, your system will boost any compatible phone/network. A green light on the side of the amplifier indicates optimal operation. A red light indicates that an automatic shutdown has taken place. This is either due to the exterior antenna and amplifier cradle being too close, or being too close to a cellular tower. The Sleek cradle systems require direct physical contact with the back of your cell phone, so you must use hands-free calling or the speakerphone on your device to benefit from the signal amplification.

The optional home/office accessory kit (included in some kits) allows for easy desktop installation and vehicle-to-building mobility. The amplifier-only option does not include an exterior antenna.
  1. Great So Far

    Posted by Unknown on 28th Feb 2013

    Does what it says so far. Only had it about a week.


Add to Wish List

Click the button below to add the Sleek 4G Amplifier Only, +26dB all 4G cradle - 813425 to your wish list.



Your trusted source for Wilson Electronics signal boosters

© 2014 WilsonAmplifiers.com | Sitemap | Blog

Seal BBB Authorize.Net system installer retailer installer Paypal