Wednesday - April 08, 2020
We’re Open for Business
17th Feb 2014 /
by Wilson Amplifiers / Comments

How to Permanently Solve Bad Cell phone reception

Cell phones are a part of everyday life. No one can think of leaving the home without phone on their person. They help you stay connected to your loved ones and associates while you are on the go and spare you from having to look for a payphone to use a landline. Losing one feels like as if you are disconnected from the world at large. So it goes without saying that that they should work as they are designed to. But that cannot happen if they don’t receive strong signals.

A homeowner or businessperson would rather install a cell phone amplifier than suffer through a plethora of dropped calls in an area that is miles away from the nearest cell phone tower. This can permanently solve a bad cell phone reception. Of course, there are a few things you need to keep in mind before you opt for a cell phone amplifier.

FCC Approved

A recent survey by the Pew Internet and American Life Project found that over 72% of Americans experienced dropped calls while 32 percent of the population complains about experiencing the same problem at least a few times a week. A dropped call can become a major problem especially if you are an employee and a poor signal compels your cell phone to hang up on your boss! A lot cell phone service providers like Verizon try to make up for the obvious lack of cell phone signals by installing more cell phone towers. However, budgetary constraints prevent them from initiating a long term solution and solving the problem permanently.

So what are consumers to do? How do they solve the problems that come with a bad cell phone reception and make them a passing memory? Getting through the day is impossible without a cell phone in your back pocket or purse. The FCC finally came up with a solution to the problem by allowing the use of cell phone signal boosters. The move was initiated to extend the range of cell networks into areas that receive poor service. This includes offices, homes, commercial businesses and any other areas in which people might need to use cell phones.

You will get a bad cell phone reception once your cellular device runs out of cell phone towers to attain signals from. Your coverage will depend on strategically placed cell phone towers and will not have to deal with any disruptions or dead zones once it is comfortably within the network. Cell phone coverage in homes can become spotty if someone decides to build a lot of high rise buildings in the area. Cellular signals are in the form of radio waves and will have trouble reaching a cell phone if there are a lot of concrete structures that are barring its way. Homes that have wire mesh in their construct will also face this problem due to the same reason.

Of course, you do not need to move house just because you don’t have a landline and feel cut off from society without a cell phone signal. Here is how a cell phone amplifier can help you receive a strong signal.

How a Cell Phone Amplifier helps

Cell phone amplifiers or repeaters are designed by keeping two factors in mind when it comes to bad cell phone reception:

  • They are designed to amplify a weak cellular signal
  • They bypass any obstructions to provide a stronger signal indoors especially to areas that are lacking in coverage

How to Choose the Perfect Cell Phone Amplifier?

In order to ensure that you choose the best cell phone booster for your particular situation, you need to know the following:

  • The networks or cell signal carriers that your phone supports
  • The strength of the outdoor signals of a particular carrier
  • The size of the area that needs to be covered

Remember, a cell phone booster will only amplify the frequencies of radio waves that are specific to certain carriers such as Verizon, AT&T and Sprint amongst others. These networks are on specific networks such as 2G, 3G and 4G LTE. In other words, you need to determine the carrier as well as the network that supports it before you can choose a device that would serve your purpose the best. This also involves the type of wireless booster antenna that you might need.

The layout of an area will also determine the type of antenna that your cell phone booster will need to have. For instance a booster with a dome antenna will be suitable for distributing an amplified signal if the device is meant to be placed on one floor. However, a dome antenna will not work as efficiently for multiple floors. In cases such as these, a panel antenna will be your best choice. This particular type of antenna is designed to be more directional. In other words, it can easily be used to ensure that a weak cell phone signal is amplified and distributed across a required area.

Does the FCC allow Amplifiers?

The FCC worked with both cell phone carriers and cell phone signal booster manufacturers and announced a final approval of cell phone amplifiers for the consumers in the country this February. The organization also conducts checks to ensure that cell phone boosters do not interrupt carrier networks. This also involves the registration of the cell phone booster with the carrier that it will be used with. The latest amplifiers must be distributed according to the strictest regulatory standards. This is to ensure that the public uses equipment that is safe and legal.

Wilson Amplifiers

This is why customers trust Wilson Amplifiers. The US based company only offers cell phone boosters and other products that are approved by the FCC. A Wilson cell phone booster is just what you need to ensure that your signals come through loud and clear (pun intended). 

Get better signal contact our experts 24/7:


Questions or Comments? Contact Us.