Wilson 304452 Window Mount Panel Antenna is a 50 ohms wide-band antenna designed to be used with one of our amplifiers and features up to 10.6 dB of gain. The Wilson 304452 improves signal transmission between your Wilson amplifier and your nearest cellular signal tower. It is built for fixed installations and should face the nearest cellular signal tower. This panel antenna is utilized differently that the other indoor phone-facing panel antennas as it is intended to replace an outdoor Omni or Yagi antenna. This antenna is designed to be mounted on the inside glass-surface of your window facing the outside of the building towards your nearby cellular tower. It is a viable choice when a typical outdoor antenna (Omni or Yagi) cannot be easily mounted on the roof or high exterior wall. It is suitable for apartments and condominiums with limited exterior property modification access. So it is possible that your 50 ohm amplifier system will utilize this panel antenna to face the tower and another panel antenna (with wall, ceiling, or pole mount) to face your cellular devices. This is completely fine as long as adequate separation between the two panel antennas exists.
|FREQUENCY & Gain||700-800 MHz |
|5.2 dB |
|MAX POWER||50 watts|
|BEAMWIDTH HORIZONTAL PLANE||70 / 60 Deg|
|BEAMWIDTH VERTICAL PLANE||50 / 45 Deg|
|DIMENSIONS||8.27 x 7.09 x 1.73 in |
21 x 18 x 4.39 cm
|WEIGHT||1.32 lbs / 0.6 kg|
This panel antenna is not a typical indoor panel antenna. It is intended to replace an outdoor Yagi or Omni antenna as the tower-facing antenna, when roof access is restricted. This antenna cannot be used as an indoor panel antenna because the window mount forces the antenna to mount on inside facing outwards. This is not a weather-resistant antenna so do not attempt to attach to outside window to face inwards).
Ensure that you purchase the correct impedance antenna for your amplifier system. 50 ohm antennas (with N connectors) go with 50 ohm systems and 75 ohm antennas (with F connectors) go with 75 ohm systems. Panel antenna installation is easy. Just choose your preferred mounting style. Attach the mount in the optimal place on wall, ceiling, or pole. Attach the antenna to the fixed mount. And connect the installed antenna to the amplifier using a separate N-Male (50 ohm) or F-Male (75 ohm) cable. Panel Antennas are directional antennas which will transmit and receive signal mostly from the front. It can be installed both vertically on walls or poles (weather-resistant version) and horizontally on ceilings. Please use the appropriate mount for each specific installation. This is a building antenna so large vehicle installations will require secure installation using appropriate mounts to prevent antenna vibration and shifting inside the mount.
If you have questions or require assistance, please call our customer and tech support at 1-800-568-2723 or email at sales@WilsonAmplifiers.com. We will be happy to assist you in every step of the way.
Wilson Amplifiers provides a free service to help you along the way. Please check out our blog for more information.
Watch product info and how-to guides videos from our experts.
How to install a weBoost Home Kit
How to install a weBoost Vehicle Kit
Your sub total is %s.