Wilson 460111 MobileMaxx 3G Amplifier Kit with 12inch Magnet-Mount Antenna boosts talk, text, 2G, and 3G for most US carriers: AT&T, Verizon, T-Mobile, Sprint, etc. (except for Clearwire and Nextel) for vehicles such as cars, trucks, vans, RVs and boats, up to 50 dB gain!
It's time for Wilson Electronics to provide you the best solution for a better signal while on the go. With over 40 years of award-winning enginnering and assembly in the US, it's time to end the frustrations and finally get what you simply wanted: Clear calls, stable connections, better coverage, and faster internet speeds. Yes, you deserve and can get more bars.
You can’t deal with another dropped call. The person on the other line sounds like he's at the bottom of the ocean. Text messages get stuck and unsent. This model is designed to increase cellular data (talk, text, basic 3G Internet) in a vehicle such as car, truck, van, RV and boat, up to 50 dB gain for multiple users.
The Wilson 460111 MobileMaxx 3G Booster amplifies talk & text, and 3G for all major carrier networks except for Clearwire, Nextel, Mobilicity and WIND
It works by pulling in the existing weak signal with a high-gain output omni-directional antenna, amplifying it multiple times with Wilson's SmarTech II technology, and then redirecting to your vehicle. Straight from the cell tower to your phone. It’s almost magic.
The existing outside signal strength that you receive from the roof of your vehicle (where you would mount the outside antenna) has a large impact on the amount of coverage area you get from a signal booster. It is important to remember that there are many factors that go into determining the coverage area, so actual results may vary from these estimates.
The Wilson MobileMaxx 3G cellular signal boosterkit is a simple, effective solution to maintain continuous communication for all cellular-enabled devices – smartphones, tablets, etc - in your vehicle.
|MAX GAIN||50 decibels (dB)|
|POWER REQUIREMENT||12-15 V, 2A|
|DIMENSIONS||4.5 x 6.44 x 1.19 in
11.43 x 16.35 x 3.02 cm
|WEIGHT||1.195 lbs / 0.54 kg (amplifier only)|
The product is easy to install. Everything is included in the kit.
If you have questions or require assistance, please call our customer and tech support at 1-800-568-2723 or email at sales@WilsonAmplifiers.com. We will be happy to assist you in every step of the way.
Wilson Amplifiers provides a free service to help you along the way. Please check out our blog for more information.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards
Watch product info and how-to guides videos from our experts.
How to install a weBoost Home Kit
How to install a weBoost Vehicle Kit
Your sub total is %s.