Sorry but this item is currently unavailable.
Please check back at a later stage.
This item has been discontinued.
For our Canadian customers, the Wilson 8* series will soon run out of stock. Before being replaced by the Wilson 46* series, these products were unregulated by the FCC and IC, therefore, are more powerful than today's regulated boosters.
These legacy boosters are legal and grandfathered into program
Up to 50% off, 30-day money guarantee, and lifetime product tech support! For all clearance sales, check out our Canadian Clearance Page.
For US customers, please consider the Wilson 460105 AG Pro 70.
The 801265-BL1 Building Kit is a complete kit built around the Wilson 801265 AG Pro 70 - a professional grade dual band signal amplifier designed for larger areas within buildings, warehouses, and even larger homes. This is a highly configurable, installer friendly amplifier that permits numerous configurations including applications that require multiple inside antennas and varying signal distributions. The 801265-BL1 Kit contains everything you need for a typical single antenna setup.
The AG Pro 70 is one of the highest gain amplifiers Wilson has issued to date, packing 65 dB of gain on the 850 Mhz range and 70 dB on the 1900 Mhz band. This is an Adjustable Gain amplifier - simplifiying installation by making antenna placement less critical, and allowing greater control over signal distribution. The amplifier supports multiple cell phones and data cards concurrently, and is compatible with all cellular devices on all the major North American cellular networks (except Nextel/iDEN, and 4G), and includes Wilson Electronics’ patented network protection technologies to prevent interference on cellular networks.
In addition to the amplifier, this kit contains a powerful uni-directional antenna, the 304475, Wilson's 301155 Wall-Mount Panel Antenna, and 20, 30 and 50 feet lengths of Low Loss RG-6 coaxial cable.
|Frequency||824-894 MHz / 1850-1990 MHz|
|Gain||65 dB / 70 dB|
|Max Uplink Power||1200 mw / 1110 mw|
|Max Downlink Power||26 dBm / 25 dBm|
|Noise Figure||3.5 dB Nominal|
|Power Requirements||110-240 V AC, 50-60 Hz, 8 W|
|Dimensions||5.7 x 4.2 x 1.5 inches / 14.0 x 10.8 x 3.9 cm|
|Weight||1.27 lbs / 0.544 kg|
Posted by Tyler, Canada on 27th Feb 2015
The kit shipped extremely quickly and was well packaged with very clear instructions. I called the toll free line to double check the best location for the inside antenna and was very pleased with the friendly and knowledgeable advice. The unit was simple to install and as soon as I plugged in the power I was greeted with green lights and full bars on my phone. I have a 1500 sq foot house with stucco exterior in a poor cell reception zone and now I am fully covered in every room. Couldn't be happier so far!
Items you recently viewed.
Your sub total is %s.