Correct installation of commercial-grade cellular signal amplifiers requires a trained system design expert to design and lay out your plan and an installation professional to ensure you get the best coverage and comply with all local and federal regulations.
Maximum Coverage: Industry-leading 4-in-1 amplifier design with configurations up to 16 inside antennas for wide and/or priority coverage up to 100,000 sq ft.
For Large Buildings: Offices, hospitals, hotels, schools, warehouses, manufacturing plants, and any multi-story buildings.
Frequencies Covered (4G LTE and 3G): Band 12/17 - 700 MHz, Band 13 - 700 MHz, Band 5 - 850 MHz, Band 4 - 1700/2100 MHz, and Band 2 - 1900 MHz.
Industry-leading Tech: XDR (eXtended dynamic range) and auto-adjusting gain control in any condition for continuous reception.
MTT (Multi-Tower Targeting) Technology: Grants 3 donor antenna ports, to ensure multi-tower coverage and ease of installing multiple donor antennas.
Remote Monitoring: Through the Wilson Cloud service and built in LTE modem.
Local Amplifier Configuration Utility: Connect via ethernet for easy settings changes.
Free Up Bandwidth: Create a network specifically for cellular communication.
Carriers Supported: AT&T, Verizon, T-Mobile, Sprint (except 2300 band), US Cellular, and MVNOs pke Metro PCS, Straight Talk, Cricket, Boost Mobile, Tracfone, Best Cellular, and more.
Powerful Professional Grade Signal Booster For Large Commercial Buildings and Medium to Large Enterprise
The WilsonPro Enterprise 4300 cell phone signal booster provides significantly enhanced 4G, LTE, and 3G voice and data coverage inside commercial buildings and medium sized enterprise where cell signals may not otherwise penetrate. Installation of an Enterprise 4300 cell signal amplifier system results in fewer dropped calls, improved voice quality, uninterrupted texts, and faster data speeds - along with better audio and video streaming.
The Enterprise 4300 represents the latest in cell signal boosting technology—including a revolutionary industry-first, three outdoor-antenna-port configuration. Depending on cell tower locations, using up to three outdoor antennas (each dedicated to a specific frequency band to collectively amplify signals from multiple towers) helps maximize coverage in commercial spaces up to 100,000 sq. ft.
With wired or LTE access (using the built-in cellular modem) to the WilsonPro Cloud for remote functionality, the Enterprise 4300 provides integrators and building managers with the capability to remotely manage, monitor, and adjust their amplifier, as well as receive real-time updates on a smartphone or tablet. Immediate notification of issues, such as system failure, oscillation, or change in signal strength is also provided via text or email.
Like all WilsonPro cell signal boosters, the Enterprise 4300 amplifier system is universal: it works for all cellular devices, all services and all U.S. cell phone carriers.
Backed by a 3-year manufacturer warranty, 24-hour US-based customer support (Texas!), 30-day better signal or money back guarantee, and lifetime technical support.
Goodbye, no-signal frustrations.
For people needing coverage for commercial buildings and offices up to 100,000 sq ft.
Best for: large multi-story buildings, industrial warehouses, schools, hospitals, hotels, underground parking areas, and other large spaces.
The WilsonPro Enterprise 4300 typically covers 40,000 to 100,000 sq ft based on our customer response and install team. This range will vary depending on how strong the outside signal is and what interference exists inside and outside the building.
The Enterprise 4300 has three main advantages over the WilsonPro 1100. First, it has more coverage due to increased uplink/downlink power. Second, it contains a built-in splitter to allow for easier multi-antenna setups. Finally, it allows for connection to the Wilson Cloud, which provides remote monitoring service. This lets you keep track of your amplifier’s status, and make adjustments as necessary. With its massively improved coverage, the 4300 is the clear amplifier of choice for large installations or mid-size buildings in very rural areas.
The three main causes of poor cellular reception in a building are cell tower distance, outside interference, and building material. It is especially true of building material in city and urban areas and of cell tower distance in rural areas.
Many older buildings are built with high-density materials such as thick concrete, brick, and metal which block cell signals. Many modern buildings use energy-efficient materials such as radiant barrier and low-energy glass that disrupt signals.
Any combination of these obstructions interrupt cellular service inside the building.
The Enterprise 4300 commercial cellular amplifier solves all three problems by extending your reach to the nearest cell tower, bypassing any building material interference, and amplifying the signal inside.
Consistent delivery. Consistent service. 24 hours a day.
For large offices and enterprise buildings, the Wilson Pro Enterprise 4300 is the best possible choice for better 4G, LTE, and 3G coverage.
Note:Does not support Sprint LTE Plus (formerly known as Spark), 2.5 Ghz spectrum. Other Sprint 3G & 4G LTE bands are supported.
The WilsonPro Enterprise 4300 is a an easy-install 3 part system:
Each kit comes with everything you need for a complete installation.
Your outside signal strength, especially the roof or fasica where you install the outside antenna, has a large impact on the amount of coverage area you get from a signal booster. It is important to know that there many unique factors that go into determining coverage area, so actual results may vary from these estimates.
To learn more about accurately reading getting your outside signal strength, please see our guide on Finding your true cellular signal: It’s all about dB.
|If you current outside signal is:||You May Receive Boosted indoor signal:|
|Current outside signal:||You may get:|
|5 Bars (-40 to -70 dB)||up to 100,000 sq. ft.|
|4-5 Bars (-70 to - 80 dB)||up to 80,000 sq. ft.|
|3-4 Bars (-85 to -95 dB)||up to 60,000 sq. ft.|
|2-3 Bars (-95 to -105 dB)||up to 40,000 sq. ft.|
|1-2 Bars (-105 to - 115 dB)||up to 20,000 sq. ft.|
|No Signal (-120 dB)||Most likely no signal to boost.|
The Wilson Enterprise 4300 cellular signal booster is a simple, effective solution to maintain continuous communication for all cellular-enabled devices – smartphones, tablets, etc - in your home or workspace.
|FREQUENCY||698-716 MHz; 729-746 MHz; |
777-787 MHz; 824-894MHz;
1850-1995MHz; 1710-1755/2110-2155 MHz
|MAX GAIN||70 decibels (dB)|
|CONNECTORS||N-Connector 50 Ohm|
|POWER||110 - 240 V AC, 50 - 60 Hz, 30 W|
|DIMENSIONS||19 x 12 x 2.5 in|
|WEIGHT||16.93 lbs (amplifier only)|
|FCC Notice||This is a CONSUMER device. |
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.
How A Commercial Booster Works
How to Conduct Site Survey
Commercial Signal Booster Installer Guide
The product is easy to install. Everything is included in the kit.
If you have questions or require assistance, please call our customer and tech support at 1-800-887-1961 or email at Pro@WilsonAmplifiers.com. We will be happy to assist you in every step of the way.
WARNING: This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
We're in the business of providing reliable connection– not selling boxes, not selling snake oil, and definitely not losing your trust.
First 100% Guarantee: We provide a 90 Day Money Back Guarantee on all new weBoost products (30 Days for refurbished/renewed products). No other company does that. Take your time and make sure you’re happy with the solution. We’re here to support you if you have any questions. That's the Wilson Amplifiers difference.
Second 100% Guarantee: Anytime during your 2-year manufacturer's warranty (1 year for refurbished/renewed), should your unit not perform to its usual standards, contact us, and we'll take care of it. We're not here for the one-time sale. We're here for the lifetime supporter. We want to be loved.
Third 100% Guarantee: Lifetime technical support. You’re our guest. Whether it’s finding cell tower locations, learning about new cellular technology, or asking about installations, we’re here to help. We’re also fond of football debates and talking about all things food.
Oh, and we also provide FREE shipping for everything 😉