A Wilson Electronics Tap (also called coupler) is a wideband cellular accessory. They allow for controlled signal distribution to large and small areas with a consistent drop in dB levels. These taps allow for an additional indoor antenna to be placed along a route, making them ideal for long cable runs and dropping antennas along a hallway.
These taps are designed to be placed indoors. Each port on the 50-ohm taps use N-Female termination, meaning it is compatible with N-Male terminated cable or adapters. The 75-ohm taps use F-Female termination, meaning it is compatible with F-Male terminated cable or adapters.
Here are the tap variants we carry:
The higher the dB loss on the antenna, the less for continuing the cable run, and vice versa.
Be sure to pick the right tap for the cable run you need. Feel free to call us at 1-800-568-2723 for help choosing or for free advice.
|LOSS||-7 dB dB / -10 dB dB|