iDen Building Amplifier Only, +70dB - Wilson 804080, main
iDen Building Amplifier Only, +70db
$589.95
$469.95
(You save $120.00 )

iDen Building Amplifier Only, +70db - 804080

Discontinued.
$589.95
$469.95
(You save $120.00 )
FREE Standard Shipping. Expedited Shipping available.
No Tax For Orders Outside Texas.
90 Day Money Back Guarantee.
2 (Two) Year Warranty.

Product Details

This item has been discontinued. 

Wilson 804080 Amplifier Only.  This is a single band iDEN 800 MHz Adjustable Gain In-Building Wireless Smart Technology II™ signal booster.  Wilson Signal Boosters are bi-directional devices that deliver service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed signal in mobile, M2M, marine and in-building applications. When using a Wilson Electronics Signal Booster in conjunction with Wilson Electronics antennas, the Outside Antenna will collect the cell tower signal and send it through the cable to the Signal Booster. The signal is then amplified and re-transmitted through the Inside Antenna into the room. Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the Inside Antenna, amplified by the Signal Booster and transmitted back to the cell tower through the Outside Antenna.

If you are looking for a ready-to-install complete kit, check out the Wilson 844080 kit.

Compatibility:

  • This iDen Amplifier Kit is only comnpatible with iDen 800MHz frequency and is intended for in-building 50ohm installations.

Included in Package:

  • Wilson 804080 with 7V AC power Supply (859986), 50ohm

 Features:

  • Adjustable gain control for simple installation in most locations
  • Provides a reliable signal to significantly reduce dropped calls and increase data rates
  • No physical connection to your cell phone or data card
  • Allows multiple phones and cellular data cards to be used simultaneously
  • Oscillation (or interference) detection and automatic shutdown with auto reset
  • Overload protection circuit – protects cell towers from being overloaded
  • Bi-directional signal booster amplifies signals both to and from the cell tower
  • Compatible with all cellular devices on Nextel/iDEN cellular networks
  • Configurable with a variety of Wilson cellular antennas to fit virtually any building installation
  • Extends battery life – Booster enables phone to work at reduced power

Buyer's Guide:

 

Product Number:

804080

Frequency:                  

806-821 MHz / 851-866 MHz

Gain:                          

70 dB / 75 dB

Max Uplink Power:        

2512 mw

Max Downlink Power:   

26 dBm

Noise Figure:               

3.5 dB nominal

Power Requirements:

100-240 V AC, 50-60 Hz, 21 W

Connectors:

N-Female

Dimensions:                

5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm)

Weight:  

1.27 lbs (0.544 kg)

Installation Guide

 

YOUR SATISFACTION IS OUR PRIORITY. SEE THE PROOF.

We're in the business of providing reliable connection– not selling boxes, not selling snake oil, and definitely not losing your trust.

First 100% Guarantee: We provide 90 Day Money Back Guarantee on all weBoost products. No other company does that. Take your time and make sure you’re happy with the solution. We’re here to support you if you have any questions. That's the Wilson Amplifiers difference.

Second 100% Guarantee: Anytime during your 2-year manufacturer's warranty (1 year for refurbished), should your unit not perform to its usual standards, contact us, and we'll take care of it. We're not here for the one-time sale. We're here for the lifetime supporter. We want to be loved.

Third 100% Guarantee: Lifetime technical support. You’re our guest. Whether it’s finding cell tower locations, learning about new cellular technology, or asking about installations, we’re here to help. We’re also fond of football debates and talking about all things food.

Oh, and we also provide FREE shipping for everything 😉

Questions or Comments? Contact Us.