Sorry but this item is currently unavailable.
Please check back at a later stage.
For our Canadian customers, the Wilson 8* series will soon run out of stock. Before being replaced by the Wilson 46* series, these products were unregulated by the FCC and IC, therefore, are more powerful than today's regulated boosters.
These legacy boosters are legal and grandfathered into program, and are in very limited supply.
Up to 50% off, 30-day money guarantee, and lifetime product tech support! For all clearance sales, check out our Canadian Clearance Page.
Wilson 806215 In-Line Post-amplifier Booster is a 50 Ohm N-Female in-line booster intended to provide additional signal boost for complete, stand-alone 50 ohm building systems. It has been developed to be in alliance with other large building amplifiers to neutralize splitter and cable loss. Also called In-Line booster or Post-Amp booster, Wilson 806215 extends strength of the signal coming out of the signal booster. The In-Line Booster (806215) is designed to offset cable and splitter/tap loss for in-building installations. It should be used on the Inside Antenna side of a Wilson Electronics In-Building Signal Booster such as the AG Pro 75. By installing the Signal Booster near an Inside Antenna, uplink noise figure is minimized and downlink power is maximized. Additionally, the In-Line Signal Booster enhances performance of the main Signal Booster by increasing the system gain and input signal dynamic range. The variable gain knobs on the In-Line allow for simple, quick signal level balancing and installation.
The In-Line Signal Booster makes up for the losses created in large building areas by the cables, splitters, or taps. The 806215 includes Adjustable Gain to easily balance signal level and dual band compatibility that function on 800/1900 MHz frequency.
|Frequency||824−849 MHz / 1850-1990 MHz|
|Gain||19 dB / 19 dB|
|Max Uplink||0.43 mw / 0.63 mw|
|Max Downlink||30.2 dBm / 30.5 dBm|
|Noise Figure||3.5 dB nominal / 6 dB nominal|
|Power Requirements||110-240 V AC, 50-60 Hz, 8 W|
|Connectors||N Female 50 ohms|
|Dimensions||5.7 x 4.2 x 1.5 inch (14 .0 x 10 .8 x 3 .9 cm)|
|Weight||1.27 lbs (0.544 kg)|
Additional Products to Consider:
Items you recently viewed.
Your sub total is %s.