bing tracking
ajax loader  Loading... Please wait...

PLUG-N-PLAY KITS

SignalBoost Kit w/4" & ultra slim, +30dB 3G wired - 811211

Product subtitle:

Dual-band wired amplifier system for all 3G/Edge North American networks, single-user

product-weight:

4

White Arrow
Price Match Guarantee

THE WILSON AMPLIFIERS
TRIPLE GUARANTEE

100% Satisfaction

  • 30-day money-back guarantee.

100% Service & Support: 

  • Free shipping on all items! 2 year warranty. 

100% Security:

  • Google Trusted Store verified by PayPal, BBB, and Authorize.net.  
SKU:
WA811211
Availability:
Discontinued
Price:
$219.95

The Wilson 811211 has been discontinued. Please consider the Wilson 801212.

Wilson 811211 Complete Kit includes the Wilson 811210 dual-band direct connect booster and a 4-inch Magnet Mount outside antenna.  This kit comes with an ultra slim inside antenna that attaches directly to any phone or data card - no equipment-specific adapter is required like with other Direct-Connect amplifiers.  Other types of direct-connect antennas are also available - like a universal cradle.  Direct Connect amplifiers provide maximum signal performance in low-signal areas, particularly rural and remote locations.  These workhorses can be used both in fixed and mobile applications - including buildings, cars, boats, trucks, RV's etc.

Application/Usage:

  • Signal booster kit designed for installation in both fixed and mobile applications - including buildings, cars, boats, trucks, RV's etc
Compatibility:
  • Supports all carriers that transmit at 824-894 and 1850-1990 MHz frequency bands only and works on all generations of CDMA, TDMA, GSM, and 3G
  • Works with 50 Ohm antennas and accessories
  • Does not support Nextel/iDen, Verizon 4G LTE, and AT&T 4G LTE/AWS
  • Contact us before you purchase this item if you are unsure 
Package Includes:

Product Features:

  • Connects directly to device
  • Greatly reduces dropped calls
  • Extends signal range
  • Increases data rates
  • Direct-Connect Amp: NO Oscillation
  • Overload protection circuit
  • Protects cell towers from being overloaded
  • Amplifies signal both to and from cell towers
  • Great for increasing data rates for 3G Technologies
  • Works on all generations of CDMA, TDMA and GSM
  • Extends battery life
  • Maximum 3000 milliwatts output power
  • FCC and IC type accepted

Technical Specifications

Part No.  811210 (amplifier included in kit)
Frequency  824-894 MHz / 1850-1990 MHz
Gain  30 dB / 30 dB 
Max Uplink Power  2700 mw / 1070 mw
Max Downlink Power  +6  / +7 dBm 
Noise Figure  3.5 dB nominal 
Flatness  ±2 dB
Isolation  >50 dB
Power Requirements                  12 V, 2 A max 
Connectors  FME Male 50 ohm   
Dimensions  5 x 3.5 x 1.2 inches / 12.7 x 8.9 x 3 cm   
Weight  1.03 lbs / 0.468 kg
Documentation  Installation Guide

 

 

 

 

 

 

 

 

 

 

 

 

 
 
SignalBoost installation is user-friendly and shouldnÌ´Ì_ÌÎ̴̝åÈt take more than 45 minutes. SignalBoost amplifier systems have three separate components which need to be installed and connected: the amplifier unit, the exterior antenna, and the interior antenna.



First, install the metal amplifier unit on the floor under the passenger seat using the four mounting screw holes for secure attachment. The included 12V car cigarette lighter power supply with a 6-foot cable is used to power the amplifier. Additional 12V AC wall power supplies and 12V DC hardwire vehicle kits are available.



Second, install the included exterior antenna (or separate FME-type antenna) in the desirable position on the high, unobstructed point of your vehicle (with at least 12 inches away from other antennas and 6 inches away from windows or sunroof). Adequate separation between exterior antenna and interior antenna is needed for oscillation-free operation. Different exterior antennas will have different installation procedures (magnet-mount, glass-mount, NMO, trucker, marine).



Third, install the Ultra Slim Velcro or cradle Plus interior antenna (depending on product selection) as specified by your installation manual. Ultra Slim Velcro antenna is attached to the back of the phone while the Cradle Plus antenna is used to hold the phone while mounted on the dashboard.



Finally, connect the exterior and interior antenna to the amplifier and power the amplifier unit to turn the system on. Once connected and powered, your system will boost any compatible phone/network in its coverage area. A green light on the side of the amplifier indicates optimal operation. A red light indicates that an automatic shutdown has taken place. This is either due to the exterior antenna and amplifier cradle being too close, or being too close to a cellular tower.



SignalBoost kits are wired systems which require direct physical contact with a single phone they are boosting. You must use hands-free or speakerphone calling to benefit from the signal amplification.



Optional home/office accessories are available to allow easy in-building installation and vehicle-to-building mobility. The amplifier-only option does not include an exterior antenna.

Product Videos

Wilson Signal Boosters Overview - How they work (01:59)
Animation of how Wilson Electronics Signal Boosters work to make your cellphone stay connected.
  • Video Info
    Wilson Signal ...
    Animation of how Wilson Electronics Signal Boosters work to ma...
  • Video Info
    Installing a C...
    This video will show you how to install a Wilson Electronics c...

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the SignalBoost Kit w/4" & ultra slim, +30dB 3G wired - 811211 to your wish list.

You Recently Viewed...

Items you recently viewed.



© 2016 WilsonAmplifiers.com
Sitemap | Privacy Policy | Terms of Use

Seal BBB Authorize.Net Paypal
Seal weBoost zBoost Wilson amplifiers inc500 Wilson Greater Houston Builder's Association Seal

Your sub total is %s.