The weBoost Home Studio is weBoost’s newest budget option for small to large rooms. It enhances 4G, 4G LTE, and 3G in an area of up to 3,000 sq. ft. It’s a brand new type of home signal booster, with farther reach to the cell tower to provide more reliable boosted signal.
The weBoost Home Studio mobile signal booster is useful for people who rely on their cell phones for their home offices. If you require a stronger cellular signal to stay in contact with customers, vendors, remote employees, and others, the weBoost Home Studio cell phone signal amplifier can help. It covers up to 3,000 sq ft under best conditions. Real-world results puts it around 200-500 sq ft. Of course, depending on your outside signal strength and outside antenna mounting option, you may get more or less coverage.
The weBoost Home Studio is a great cell phone signal booster for those who need a multi-carrier, one-room/apartment/small house cell phone booster but do not want to pay high prices. Plus, it also features a simple installation, and with Wilson Amplifiers’ exclusive Home Studio Installer Bundle, you’ll have the necessary tools to protect your investment and make installation even easier.
Wilson Electronics has been pioneering RF and cellular technology since the early 1990s. The weBoost Home Studio cell signal booster was borne of a desire to provide an affordable option for those living in smaller spaces, or who only need signal in one room.
Backed by a 2-year manufacturer warranty, 24-hour US-based customer support (Texas!), 90-day better signal or money back guarantee, and lifetime technical support.
The weBoost Home Studio cellular signal booster is a simple, effective solution to maintain continuous communication for all cellular-enabled devices – smartphones, tablets, etc - in your home or workspace.
SKU |
470166 |
FREQUENCY |
BAND 12/17 - 700 Mhz
Band 13 - 700 Mhz
BAND 5 - 850 Mhz
BAND 4 - 1700/2100 Mhz
BAND 25/2 - 1900 Mhz
|
MAX GAIN |
60 decibels (dB) |
IMPEDANCE |
75 Ohms |
POWER |
110-240V AC, 60-80 Hz, 20 W |
CONNECTORS |
F-Female, SMA-Male, Barrel |
DIMENSIONS |
6.125 x 3.875 x 1.125 in |
WEIGHT |
10.2 oz (amplifier only) |
UPC |
810005962452 |
FCC Notice |
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. |
Installing the weBoost Home Studio is quite simple and can be done in a few steps:
- Attach the whip antenna to the Home Studio amplifier
- Place the Home Studio amplifier in the room where stronger cell signal is needed
- Locate the area with the best cell signal outside your home
- Mount the Yagi antenna where you have the best cell signal and point it towards your nearest cell tower
- Connect the RG6 cable to the outdoor Yagi antenna, route it into your home or office, and connect it to the amplifier
- Connect the power supply to the amplifier and power it up.
You’ll need some general handyman skills but nothing too specialized. If you prefer having someone else do the job, you can also contact your local general contractor, electrician, or anyone who’s installed a satellite TV dish. We have numerous resources demonstrating this process, and trained support personnel to answer any of your questions, now or in the future. For assistance, please call us at 1-800-568-2723.