weBoost IoT Direct Connect M2M Signal Booster - 475079

$399.99

Price Match

See a lower price elsewhere?
call us for price matching!* Learn more.

Q&A

Direct-connect IoT signal amplifier that pairs with a cellular data modem for more reliable performance in weak-signal areas.
Compatible with all major U.S. carriers for flexible deployments.
Built-in fail-safe mode with passive RF bypass, so your modem stays connected even if power is interrupted.
Wide LTE coverage: 700 / 850 / 1900 / 1700–2100 MHz (Bands 12/17, 13, 5, 25/2, 4).
Performance: up to 15 dB max gain, 24 dB max uplink power, and -5 dB max downlink power.

Expected release date is 31st Mar 2026

Current Stock:

Have product questions?
Call our experts for a FREE consultation

1-800-568-2723

USA-based
customer support

Up to 90 day
money-back guarantee

Up to 2 year
product warranty

Reduced Latency, Increased Efficiency

The weBoost IoT Direct is the #1 option for improved 5G, 4G, and LTE cell signal for M2M and IoT devices. No matter the frequency, the weBoost IoT Direct reduces lag times, dropped transactions, and customer dissatisfaction.

Whether you use Verizon, AT&T, or T-Mobile for your IoT devices, the weBoost IoT Direct will allow consistent data collection, reliable monitoring, and more revenue collection options. This affordable repeater can be integrated quickly into any existing system.

Extend 5G and 4G Cellular Connections

Amplify low-band 5G and 4G for numerous IoT devices, including:

Cellular routers and modems
Security systems
Vending machines
ATMs
EV charging stations
Much more

If you own any of these devices and they struggle to receive consistent cellular signal, an IoT Direct will help.

Scalable Amplification

Install with an existing cell phone signal booster, or install as a standalone solution. Pairs well with cellular routers, which can be used to reliably broadcast WiFi through an area. It even works outdoors, unlike most other cellular signal booster options.

What's Included In The Kit?

IoT Direct Amplifier & Wall Mount Bracket - 460079

Mini Mag Antenna, N Male to SMA Female Adapter & Adhesive Pad - 301126, 972000

12V AC/DC Power - PWR000048

2 ft. SMA to N Male Cable, 1 ft. SMA to MMCX Cable & 1 ft. SMA to MCX Cable - 295802, 953012, 953013

Technical Specifications

SKU	460079
Frequency	Band 12 - 700 MHz Band 13 - 700 MHz Band 5 - 850 MHz Band 4 - 1700/2100 MHz Band 25/2 - 1900 MHz
Max Gain	15 dB
Max Uplink Power	24 dBm
Max Downlink Power	-5 dBm
Impedance	50 Ohm
Power	12V 2A
Connectors	N-Female
Booster Dimensions	5.4 x 4.2 x 1.4 in.
Booster Weight	1.58 lbs
UPC	81005966498
Product Documents	Technical Specifications Installation Guide
FCC NOTICE	This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.
WARNING: California's Proposition 65	This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/.