Wilson 460107 Sleek 4G Amplifier Kit boosts talk, text, internet, 2G, 3G, AWS and 4G/LTE for most US carriers: AT&T, Verizon, T-Mobile, Sprint, US Cellular etc. (except for Clearwire and Nextel) for vehicles such as cars, trucks, vans, RVs and boats, up to 23 dB gain for a single user.
Dropped calls, lost internet connection low bars, poor voice quality (fish tank voice), slow downloads, and limited range and reception... these are common and frustrating cell phone reception problems. When everything you do doesn't improve your situation, trust in a Wilson Electronics cell phone signal booster, an industry leader in wireless communications with over 40 years of reputable engineering and assembly.
This model is designed to increase cellular data (talk, text, internet, 2G, 3G, AWS, 4G/LTE) in a vehicle such as car, truck, van, RV and boat, up to 23 dB gain for a single user. Your cell phone will need to be directly sitting in the cradle to operate properly. Can be used hands free with a headset or Bluetooth device.
The Wilson 460107 Sleek 4G Booster amplifies talk & text, 3G and 4G LTE for all major carrier networks except for Clearwire, Nextel, Mobilicity and WIND
It works by pulling in the existing weak signal with a compact, high-gain antenna, amplifying it multiple times with Wilson's SmarTech III technology, and then redirecting to your vehicle. Straight from the cell tower to your phone. It’s almost magic.
The existing outside signal strength that you receive from the roof of your home or office (where you would mount the outside antenna) has a large impact on the amount of coverage area you get from a signal booster. It is important to remember that there are many factors that go into determining the coverage area, so actual results may vary from these estimates.
The Wilson Sleek 4G cellular signal booster is a simple, effective solution to maintain continuous communication for all cellular-enabled devices – smartphones, tablets, etc - in your car, home or workspace.
|MAX GAIN||23 decibels (dB)|
|POWER||5.5V DC/AC, 2A|
|DIMENSIONS||2.25 x 4.25 x 2.5 in
5 x 9.5 x 5.6 cm
|WEIGHT||2.5 oz / 0.07 kg (amplifier only)|
The product is easy to install. Everything is included in the kit.
If you have questions or require assistance, please call our customer and tech support at 1-800-568-2723 or email at sales@WilsonAmplifiers.com. We will be happy to assist you in every step of the way.
Wilson Amplifiers provides a free service to help you along the way. Please check out our blog for more information.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards
Watch product info and how-to guides videos from our experts.
How to install a weBoost Home Kit
How to install a weBoost Vehicle Kit
Your sub total is %s.