The WilsonPro IoT MIMO 2x2 Direct-Connect enhances cellular connectivity for ATMs, PoS terminals, and more. With 2x2 MIMO technology, it delivers faster, more reliable data transmission, ensuring optimal performance for even the most demanding IoT applications.
Featuring Power over Coax, setup is simple. By using a single cable for both power and signal, it’s easy to optimize amplifier placement for peak performance. If the amplifier loses power, passive RF bypass failover ensures continuous signal for uninterrupted data flow.
Pre-approved by all U.S. carriers, the WilsonPro IoT 2x2 MIMO is ready for deployment out of the box. Compact design fits perfectly in tight spaces without sacrificing performance, making it ideal for custom-designed IoT communication systems.
The IoT MIMO 2x2 by WilsonPro is a direct-connect amplifier designed to link with cellular modems/routers powering IoT devices and boost data transmission. 2X2 MIMO (Multiple Input, Multiple Output) capabilities allow higher data throughput, making it perfect for demanding IoT applications, such as:
Featuring passive RF bypass failover, the modem/router will stay on even if power is lost, ensuring uninterrupted data flow. Pre-approved by all major U.S. carriers, it’s ready to deploy out of the box.
Compact form factor allows seamless integration into custom-designed IoT communication systems built within tightly constrained spaces. Supporting power over coax, it's easy to achieve optimal setup for maximum performance, making it the go-to solution for reliable IoT connectivity.
| MODEL NUMBER | 462079 | |
| FREQUENCIES |
Band 12 700 MHz Band 13 700 MHz Band 5 850 MHz Band 4 1700/2100 MHz Band 25/2 1900 MHz |
|
| MAX GAIN | 15 dB | |
| MAX UPLINK POWER | 24 dBm | |
| MAX DOWNLINK POWER | -5 dBm | |
| IMPEDANCE | 50 Ohm | |
| POWER | 12V DC / 2A | |
| CONNECTORS | N-Female | |
| AMPLIFIER DIMENSIONS | 5.4 x 4.2 x 1.4 in | |
| AMPLIFIER WEIGHT | 1.58 lbs | |
| UPC | 810005965538 | |
| FCC Notice |
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. |
|
| PDFs | Technical Specifications | |
Installed in a well-ventilated location, the IoT MIMO 2x2 amplifier connects seamlessly to a cellular modem or router through a compact Power over Coax (POC) unit. It captures available 5G/4G signals and delivers them even stronger directly to the connected cellular modem or router, improving IoT data transmission.
Installation Manual
The WilsonPro IoT MIMO 2x2 Direct-Connect Amplifier is simple to install. Reference the installation manual for step-by-step instructions. For additional assistance, give us a call at 1-800-919-7442.
Download Installation ManualConfigurable for any IoT application, the IoT MIMO 2x2 amplifier is ideal for ATMs, PoS terminals, kiosks, and more.
It boosts 5G and 4G frequencies across the 700-2100 MHz spectrum.
Power over Coax (POC) allows the IoT MIMO 2x2 to use a single cable to transmit both power and signal between the amplifier and the connected components. This reduces cable clutter, eliminates the need for multiple power sources, and enables optimal system placement for maximum performance.
If the amplifier loses power, passive RF bypass failover allows signal to pass through to your cellular modem unamplified, ensuring uninterrupted connectivity.
The IoT MIMO 2x2 is designed for easy installation, and many users can set it up without professional help. It includes all the components needed, along with step-by-step instructions. However, if you’re not comfortable with technical setups, a professional installer can assist.
For best MIMO performance, the antennas should be positioned orthogonally (one vertical and the other horizontal).
