Correct installation of commercial-grade cellular signal amplifiers requires a trained system design expert to design and lay out your plan and an installation professional to ensure you get the best coverage and comply with all local and federal regulations.
Designed for Machine-to-Machine Communication
The Hotspot Omni Antenna Expansion Pack (for TS9 Routers) is a perfect complement to any cellular hotspot, as long as it can be plugged in via your cellular antenna port. It will greatly increase the power of your signal, bypassing building material and bringing enhanced signal directly to your hotspot. This results in more reliable internet service for you and your family via the cellular network.
The Wilson Pro IoT 5-Band (SKU: 460119) is the premier 4G M2M and Internet of Things signal booster. With up to +15 dB gain of power, it greatly enhances 4G LTE and 3G cell signal for any machine-to-machine device. There are no monthly fees nor does it need to be connected to any internet source (wifi or landline) to work. It simply amplifies your existing cellular service up to 32X for faster, more reliable data and Internet of Things communication.
Omni-directional donor antennas capture signal in a 360 degree pattern, giving them less gain than more directional antennas but allowing for a simpler installation. These work best in low-lying valleys and urban areas where there is signal coming from several directions. This pack has a wideband outdoor antenna that captures existing cellular signal across the 698-2700 MHz frequencies.
This expansion kit is designed for those who rely primarily on cellular signal to connect to the internet or want to set up a parallel network. The outside antenna bypasses troublesome building material to bring the existing outdoor cell signal directly to your router, greatly increasing its output. This pack is designed for routers with TS9 connector ports.
We recommend this omni pack primarily for low-lying valleys and urban areas where there is signal coming from several directions.
Note:Does not support Sprint LTE Plus (formerly known as Spark), 2.5 Ghz spectrum. Other Sprint 3G & 4G LTE bands are supported.
The external adapter plugs into the included antenna extension cable and directly into a socket on the cellular device. The provided donor antenna is placed atop or near the machine to pull in the existing signal, where it is brought to the booster, where it is amplified up to 32X.
The Signal 4G acts as a booster between your device and a cellular modem, providing uninterrupted signal.
Each kit comes with everything you need for a complete installation.
Your outside signal strength, especially the roof or fasica where you install the outside antenna, has a large impact on the amount of coverage area you get from a signal booster. It is important to know that there many unique factors that go into determining coverage area, so actual results may vary from these estimates.
To learn more about accurately reading getting your outside signal strength, please see our guide on Finding your true cellular signal: It’s all about dB.
Hotspot M2M TS9 Omni Antenna Signal Booster Kit
|FREQUENCY||BAND 12/17 - 700 Mhz; Band 13 - 700 Mhz;
BAND 5 - 850 Mhz; BAND 4 - 1700/2100 Mhz;
BAND 2 - 1900 Mhz
|MAX GAIN||15 decibels (dB)|
|POWER||5V DC, 1A|
|DIMENSIONS||3.3 x 1.9 x 0.8 in / 8.4 x 4.8 x 2.0 cm|
|WEIGHT||0.18 lbs / 0.08 kg (amplifier only)|
|FCC Notice||This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.
Part 1 of 6:
Where to Install Your Booster.
Part 2 of 6:
Installing the Outside Antenna.
Part 3 of 6:
Running Cable into Your Home.
Part 4 of 6:
Installing the Inside Antenna.
Part 5 of 6:
Installing the Booster.
Part 6 of 6:
Troubleshooting & Checking Your Signal.
The product is easy to install. Everything is included in the kit.
If you have questions or require assistance, please call our customer and tech support at 1-800-919-7442 or email at sales@WilsonAmplifiers.com. We will be happy to assist you in every step of the way.
WARNING: This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
We're in the business of providing reliable connection– not selling boxes, not selling snake oil, and definitely not losing your trust.
First 100% Guarantee: We provide a 90 Day Money Back Guarantee on all new weBoost products and a 30 Day Money Back Guarantee on all new Wilson Pro products. All refurbished units come with a 90 day money back guarantee. No other company does that. Take your time and make sure you’re happy with the solution. We’re here to support you if you have any questions. That's the Wilson Amplifiers difference.
Second 100% Guarantee: Anytime during your 2-year manufacturer's warranty (1 year for refurbished/renewed), should your unit not perform to its usual standards, contact us, and we'll take care of it. We're not here for the one-time sale. We're here for the lifetime supporter. We want to be loved.
Third 100% Guarantee: Lifetime technical support. You’re our guest. Whether it’s finding cell tower locations, learning about new cellular technology, or asking about installations, we’re here to help. We’re also fond of football debates and talking about all things food.
Oh, and we also provide FREE shipping for everything 😉