DO-IT-YOURSELF
Installation
weBoost for Business Office 100 Signal Booster Kit - 472060 / 473060/ 475060
$1,299.99
weBoost for Business Office 100 Signal Booster Kit - 472060 / 473060/ 475060
Ships today, if order is placed before 3pm
FREE Standard Shipping*
Next-Generation Signal Booster for Office
What is the difference between 50 ohm and 75 ohm?
Ships today, if order is placed before 3pm
FCC Approved in
the United States
the United States
Superior Coverage
For Single Device
For Single Device
Works with
All Phones & Carriers
All Phones & Carriers
Will work for the next decade and beyond
No WiFi Needed
Superior Cell Coverage from the Most Trusted Name in Boosting – Wilson Electronics
Wilson Electronics has led the field of cell phone boosters since the 1990’s, and their weBoost FCC-approved amplifiers have been relied on by businesses large and small to eliminate their cellular problems. The weBoost Office 100 (472060/473060 /475060) is designed specifically for small business use and can be bought in a variety of configurations for any cellular signal environment. It can cover up to 8,000 sq ft and is rated at up to 25,000 sq ft of coverage with the right antennas and outside signal environment.
Say Goodbye to Dropped Calls and Slow Data
Get superior cell signal for your business, no matter where you are. Rural, suburban, urban – as long as you have any signal outside, you’ll get it even stronger inside. The Office 100 is a sleek amplifier that brings existing cell signal indoors, providing incredible utility while fitting with any discerning home décor.
Cover up to 6,000 sq ft* with crisp, clear cellular signal, and up to 10,000 sq ft* in an open warehouse.
* Effective coverage area depends on quality of outside signal and internal building materials
Supercharge Your Small Business!
Don’t let cell signal hold your business back. Whether it’s your employees or your customers, all of them have phones – and not being able to use them is something they will notice. The weBoost Office 100 (472060/473060/475060) is a DIY, easy install answer to these problems, and will get your business working more efficiently than ever – and provide countless opportunities in the process.
Do It Yourself – Just the Way You Like It
The weBoost Office 100 is extremely customizable, with numerous added antennas and accessories which allow it to fit any building design. An easy install outdoor omni antenna and drop-tile compatible indoor dome antenna are included in the kit, but expansions are available as needed.
Choose between 50-ohm (for longer cable runs) (SKU: 472060/ 475060) and 75-ohm (for easier installation) (SKU: 473060) variants. Customize your kit, customize your life, and enjoy great signal no matter your building’s layout.
For the Whole Workplace
No more complaints. Reliable signal throughout your business, office, or warehouse at all times. Perfect for creating a parallel network, so it’s business as usual if your WiFi goes down. Best of all, the weBoost Office 100 (472060/473060/475060) does not discriminate – it works across all cellular bandwidths, providing complete coverage for employee and customer alike.
No monthly fees. No WiFi needed. Just fantastic cell signal.
weBoost's Best Selling Cell Phone Signal Booster
Why should I buy this booster?
There are two major considerations on whether or not to buy the weBoost Office 100. This booster works best for small businesses. The effective coverage area will vary depending on the strength of your OUTSIDE signal, so it's important to understand – if you’re expecting 6,000 square feet of coverage but have only one bar outside your building, you won’t get it. Realistic expectations of coverage in that scenario are more like 2,000-3,500 square feet.
The other major consideration is whether you’d prefer to install it yourself or have someone do it for you. The weBoost Office 100 is a DIY kit, which means you’ll be installing this booster yourself. If you’re in the United States and would rather have a booster professionally installed in your office or place of business, consider the weBoost Office Installed.
Please call us at 1-800-919-7442 for a free consultation and answers to any other questions you might have.
What do these antenna bundles do? When should I get one?
Getting an antenna bundle for your booster can expand your coverage by allowing signal to go through building material that blocks signal. They work best if you have stronger outside signal, as adding more antennas slightly reduces the power of each individual antenna.
However, in order to get coverage on multiple floors or in very long homes, getting a second antenna is highly recommended, assuming you have the outside signal strength to make good use of it.
How does installation work?
Installing any consumer signal booster setup is fairly simple. There are five steps:
- Install Outside Antenna.
- Connect to the Amplifier.
- Install Inside Antenna.
- Connect all with cables.
- Power on.
The most "difficult" part is installing the Outside Antenna.
You’ll need some general handyman skills but nothing too specialized. If you prefer having someone else do the job, you can also contact your local general contractor, electrician, or anyone who’s installed a satellite TV dish.
Let’s start:
- Find The Best Outside Signal: Begin by finding the best signal outside your house. This is done by walking around the perimeter of your home and either using the number of bars on your phone (ok method), smartphone apps (good method), or Field Test Mode (great method) to find the best location.
Pro tip: Locating the side of your home getting the best signal is the MOST CRUCIAL step of the installation process. - Install Outside Antenna: The area with the best signal is where you will mount the Outside Antenna. Place the antenna as high up as possible, ideally on the roof, although the fascia or gable is acceptable. It’s important that the Outside Antenna should be on or near the edge of the roof pointing away from the house to the cell tower and NOT pointing across the roof since it may cause interference with the Inside Antenna.
- Connect to Amplifier: Once the Outside Antenna is mounted, connect the included RG-6 cable to the Outside Antenna and to the “Outside Antenna” port on the amplifier.
Pro tip: The amplifier does all the heavy lifting for boosting signal and will get warm. Keep it in a well-ventilated area. - Install Inside Antenna: Once the cable is connected to the “Outside Antenna” port of the amplifier, do the same for the “Inside Antenna” port. Some prefer having the Inside Antenna mounted on the ceiling, others prefer the wall, and some prefer using the stand and placing it in a well-trafficked area. Again, it’s all a matter of preference and aesthetics. The most important point is to have the inside antenna located in the area you need signal the most.
Pro tip: Having enough separation between the two antennas prevents oscillation. Make sure there is at least 20 feet vertical or 50 feet horizontal distance between the two. - Power on: Plug in the power supply to the Amplifier and to the wall outlet. The amplifier will sync up and if you see all green lights, then green means GO! Check to see near the inside antenna how much better signal you’re getting.
Pro tip: Any post-installation adjustments like re-aiming the Outside Antenna or relocating the Inside Antenna will require rebooting the amplifier. Simply unplug the power supply for 5-10 seconds and replug to reboot the system.
Any questions about installation? Please call us at 1-800-919-7442 for a free consultation and answers to any other questions you might have.
What do the lights mean?
Green
Everything is working perfectly. Your signal booster is amplifying at maximum capacity.
Red
Your outside antenna is pulling in signal from your inside antenna instead of the cell tower. This is called a feedback loop or oscillation. Call your installer to get this fixed.
Orange
The outside antenna is pulling in too much signal from the cell tower. To avoid overloading, your amplifier has to shut down. This can be solved with a small adjustment to your outside antenna. Point it slightly away from the cell tower. Do this in small increments. Make sure to power off, power on your booster to ensure the amplifier is updating the light status. Green is a go.
Green & Red (Blinking)
Your outside antenna is pulling in signal from the cell tower AND your inside antenna. Your amplifier still works, but it's operating at reduced power. Call your installer if you see this problem.
Green & Orange (Blinking)
Your outside antenna is pulling in too much signal from the cell tower. It isn't enough to overload the amplifier, but it's operating at reduced power. This can be solved with a small adjustment to your outside antenna. Point it slightly away from the cell tower. Do this in small increments. Make sure to power off, power on your booster to ensure the amplifier is updating the light status. Green is a go.
Please call us at 1-800-919-7442 for a free consultation and answers to any other questions you might have.
How do I get the booster to connect to my phone?
The booster amplifies the signal reaching your phone at the source, so your phone doesn’t need to “connect” to anything. It isn’t a WiFi router – if your phone can detect cellular signal, then it will pick up the amplified signal the booster emits.
Please call us at 1-800-919-7442 for a free consultation and answers to any other questions you might have.
How can I determine the amount of boost I’m getting?
Get the OpenSignal app if you have an iPhone, or the Network Cell Info Lite app for Android, and get reading your signal strength in standard dB (decibel) measurement. The closer to 0 your number, the stronger your signal.
Please call us at 1-800-919-7442 for a free consultation and answers to any other questions you might have.
What is the return policy?
If you decide to return your weBoost Office 100 within the 90 day window, simply unplug the amplifier from the cables and email (sales@wilsonamplifiers.com) or call us (1-800-919-7442). We'd be happy to help with the refund process. We only accept the amplifier and antennas that come with the weBoost Office 100, and none of the cabling or mounting hardware.
The Power of the weBoost Office 100
- Easy to read light system alerts you to booster status
- N-Female or F-Female connectors (dependent on 50 vs. 75 ohm variant)
- +72 dB of gain
- 110-240V AC, 50-60 Hz, 20 W
What’s included in the Kit?
Office 100 Amplifier/Repeater (50-Ohm)
Item # 472060
Item # 472060
Omni Plus Antenna
Item # 314422
Item # 314422
Inside Dome Antenna
Item # 304412
Item # 304412
Lightning Surge Protector
Item # 859902
Item # 859902
2ft Low-Loss Wilson400 Cable
Item # 952302
Item # 952302
Product Overview
WEBOOST OFFICE 100 SIGNAL BOOSTER KIT - 472060/473060/475060
The weBoost Office 100 is weBoost's most powerful cell phone signal booster for small business.
Up to up to 6,000 sq ft with crisp, clear cellular signal, and up to 10,000 sq ft in an open warehouse.
Up to +72 dB of gain.
Multiple accessories for maximum coverage and customization (sold separately). Complete coverage for entire home for all carriers across multiple devices. Outdoor omni antenna and indoor dome antenna. The weBoost Office 100 mobile signal booster is useful for people who rely on their cell phones for their offices or warehouse.
With 72 dB in max gain, the Office 100 offers small businesses the most reliable cell signal possible on all available network speeds. Generating up to 24 dBm in uplink-output power, it is by far the most powerful cellular signal booster for home.
Wilson Electronics has been pioneering RF and cellular technology since the early 1990s.
Backed by a 3-year manufacturer warranty, 24-hour US-based customer support (Texas!), 90-day better signal or money back guarantee, and lifetime technical support.
Technical Specifications
The weBoost Office 100 cellular signal booster is a simple, effective solution to maintain continuous communication for all cellular-enabled devices – smartphones, tablets, etc - in your home or workspace.
| FREQUENCY | BAND 12/17 - 700 Mhz; BAND 13 - 700 Mhz; BAND 5 - 850 Mhz; BAND 4 - 1700/2100 Mhz; BAND 25/2 - 1900 Mhz |
|
| MAX GAIN | 72 decibels (dB) | |
| IMPEDANCE | 50-Ohms (472060/475060); 75-Ohms (473060) | |
| POWER | 110-240V AC, 50-60 Hz, 20 W | |
| CONNECTORS | N-Female (472060); F-Female (473060) | |
| DIMENSIONS | 6 x 6 x 1.8 in | |
| WEIGHT | 1.9 lbs (amplifier only) | |
| UPC | 810005963107/810005963114 | |
| FCC Notice | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. |
|
How Does it Work?
1
THE OUTSIDE ANTENNA PULLS IN WEAK 4G LTE AND 3G SIGNAL
2
THE AMPLIFIER BOOSTS CELL PHONE SIGNAL STRENGTH UP TO 32X
3
THE INSIDE ANTENNA REBROADCASTS ENHANCED CELLULAR SIGNAL
Stronger signal!
Cell Phone Signal Booster Benefits
- Eliminates dropped calls
- Crystal clear voice
- Quick text messages
- Faster uploads & downloads (Internet)
- Reliable reception
- Wider coverage
- Consistent connections
- Reduces dead zones
- Longer battery life
- More bars, period!
Installation Manual & Spec Sheet
Coverage Area
EXPECTED COVERAGE AREA
Your outside signal strength, especially the roof or fascia where you install the outside antenna, has a large impact on the amount of coverage area you get from a signal booster. It is important to know that there many unique factors that go into determining coverage area, so actual results may vary from these estimates.
To learn more about accurately reading/getting your outside signal strength, please see our guide on Finding your true cellular signal: It’s all about dB.
| If you current outside signal is: | You May Receive Boosted indoor signal: |
| Current outside signal: | You may get: |
 5 Bars (-40 to -70 dB) |
up to 10,000 sq. ft. |
 4-5 Bars (-70 to - 80 dB) |
up to 7,500 sq. ft. |
 3-4 Bars (-85 to -95 dB) |
up to 5,000 sq. ft. |
 2-3 Bars (-95 to -105 dB) |
up to 3,500 sq. ft. |
 1-2 Bars (-105 to - 115 dB) |
up to 1,500 sq. ft. |
 No Signal (-120 dB) |
Most likely no signal to boost. |
