Installing a commercial-grade cell signal booster system requires a professional's touch. Our team of signal experts will make sure you get coverage where you need it. We have improved indoor cellular coverage in millions of square feet for some of the largest companies in the world.
The Zinwave Unitivity 5000 Optical Remote Unit connects to the Primary or Secondary Hub using fiber. It converts optical signals to RF, or vice versa, and amplifies them for transmission. Wideband, it handles cellular frequencies 150 to 2700 MHz.
Featuring a maximum output of 20 dBm, the Optical RU offers great coverage. Equipped with two N-Type connectors, it supports one receiving antenna and one transmitting antenna. Multiple RUs are needed to maximize coverage.
Easy to install, Optical RU can be mounted above ceiling tiles or discreetly tucked away from view.
For a higher-powered Unitivity RU, check out the Low-Band Remote Unit 305-1007.
| POWER CONNECTIVITY | |
| Input Voltage | 48 V DC |
| Connector Type | Phoenix 5.08 mm 2-way connector; AWG 12-24 |
| FIBER CONNECTIVITY | |
| Type | SC/APC Duplex |
| ANTENNA CONNECTIVITY | |
| Type | Simplex N-Female Connectors (TX and RX) |
| TRAY CONNECTIVITY | |
| Glands | 3 glands with M16, M32, M20 screw threads |
| Cable Support | Supports cable diameters from 2 mm to 21 mm |
| Additional | Blank plates/glands provided |
| OTHER CONNECTIVITY | |
| Alarm Relay | Phoenix 5.08 mm 3-way with normally closed and normally open connections |
| DIMENSIONS & WEIGHT | |
| Dimensions (W x D x H) | 8.1” (206 mm) x 16.3” (415 mm) x 2.2” (55 mm) |
| Weight | 6.6 lbs (3 kg) |
| ELECTRICAL | |
| Power Consumption | 48 V DC / 0.5 A / 24 W (82 BTU/hr) |
| Minimum Input Voltage | 37 V |
| ENVIRONMENTAL | |
| Operating Temperature | -5 to +50 °C (23 to 122 °F) |
| IP Rating | IP66 Enclosure |
| Download Specification Sheet (PDF) | |
